Surf the Best Apple Videos
The Gripper Windshield Camera Mount
View Duration: 3:13
Photos of the Gripper windshield vacuum mount with the Sony DCR-DVD610. Quick drive to a job site to check out the vibration (or lack of) vs the old plywood mount. Purchased at www.filmtools.com and I am not associated with them in any way. Took me a few minutes to figure out how to configure ...
DIY Coin mechanism for homemade vending machine
View Duration: 3:07
From http://www.josepino.com - A DIY coin mechanism made with some plywood. This is the third version that I created. Details about it can be found at http://www.josepino.com/other_projects This version is easier to build, smaller, and allows to change the configuration so can match the size of ...
Wooden Outdoor Marquee Tent Flooring
View Duration: 0:12
Ideal tent and outdoor floor, using 18mm Far Eastern exterior grade plywood, with planed 50mm x 25mm timber battens and extruded aluminium clips which lock into the groove under the adjacent panel. All floors lay in a brickwork pattern using full and half panels to ensure every joint is staggered ...
Black and White Chequered Portable Dance Floor
View Duration: 0:12
The timeless elegance of black and white dance floor brings mystique and drama to your special events. The Publok is a solid colour acrylic 6mm thick. The acrylic surface lessens the appearance of scratches and lasts longer than vinyl surfaces. Publok is constructed with a plywood base, which ...
View Duration: 1:02
Sahm is constructed of three machine-cut pieces of wood or a combination of wood and plexiglas. The idea was to design a chair which would be both rational and expressive. Construction and design or engineering and aesthetic, are equated with a minimum of visible creative effort, so that it is ...
View Duration: 1:22
The Track Saw makes any cut, anywhere, and at any angle; it's like connecting the dots. See for yourself how easy it is: http://www.dewalt.com/us/tracksaw/
Sonsetbeach Orange 2x12 cab clones - re-evaluation
View Duration: 5:00
Sonsetbeach replaced the two cabs I previously reviewed. The cabs are contracted by Sonsetbeach in New Mexico through a factory/Mom/Pa shop in California. As can be seen in the video, quality of workmanship is was much better. Construction is 3/4" plywood with dado joints. Cabinet itself appeared ...
Home for the Holidays Parade Nov 29th 2008.wmv
View Duration: 5:00
This hovercraft was built about 20 years ago from a small picture. No plans - all scratch built. The frame is wood with Dacron glider cloth for covering and a canvas skirt. The engine is a 10 hp Briggs and the fan is hand carved from 2"x6" construction lumber glued and sandwiched between aircraft ...
View Duration: 1:21
Whats's with all the plywood? Featuring: "Offline Programming" To find out more on how to program robots offline using RobotStudio then view: http://www.abb.com/product/ap/seitp327/6230bcade7a9d7d8c12573f50042d0a9.aspx
